| Jenis bayaran: | T/T |
| Incoterm: | EXW |
| Pesanan minimum: | 1 Bag/Bags |
| Pengangkutan: | Air |
| Port: | Beijing,Shenzhen,Hong Kong |
Model No.: MSL-III/FN/F/S/DS/RA/R-532
Jenama: Cni
Operating Mode: Cw
Spectral Linewidth (nm): <0.00001
Output Power: 1mw-5w
Tempat Asal: China
Status: Baru
Tempoh Jaminan: 1 tahun
Laporan Ujian Mekanikal: Dengan syarat
Titik Jualan Teras: Mudah Dikendalikan
Features: Compact Design, High Resolution
| Unit Jualan | : | Bag/Bags |
| Jenis Pakej | : | Beg plastik dan kadbod percuma statik, pembungkusan pelindung |
| Contoh Gambar | : |
|
CNI melancarkan spektrometer Raman dengan ciri -ciri reka bentuk padat, resolusi tinggi, kepekaan yang tinggi, pengukuran dan operasi yang mudah, dapat menggantikan spektrofotometer lama dan digunakan secara meluas dalam penyelidikan kimia dan biologi, sains alam sekitar, penilaian perhiasan, penilaian forensik, pemeriksaan keselamatan makanan/dadah , penerokaan geologi dan banyak bidang lain
532nm mode longitudinal laser hijau untuk aplikasi Raman dibuat ciri -ciri ultra padat, jangka hayat yang panjang, kos rendah dan mudah beroperasi.Ia digunakan dalam spektrum Raman, penjujukan DNA, sitometri aliran, penyortiran sel, instrumen optik, analisis spektrum, gangguan, pengukuran , Holografi, percubaan fizik, dll.
Spektrum:
| Model | MSL-III-532 | MSL-FN-532 | MSL-F-532 |
|
Wavelength (nm) |
532±2 |
532±1 |
532±1 |
|
Operating mode |
CW | ||
|
Output power (mW) |
>1, 5, 10, 20, - , 100 |
>1, 5, 10, 20, - , 400 |
>400, 600, - , 700 |
|
Power stability (rms, over 4 hours) |
<1%, <2%, <3% |
<1%, <2%, <3%, |
<1%, <2%, <3%, <5% |
|
Transverse mode |
TEM00 | ||
|
Longitudinal mode |
Single | ||
|
Spectral linewidth (nm) |
<0.00001 | ||
|
Coherent length (m) |
>50 | ||
|
Noise of amplitude (rms, 1Hz~20MHz) |
<0.5% |
<0.5% |
<1%, typical<0.5% |
|
M2 factor |
<1.2(<1.1 optional) |
<1.2(<1.1 optional) |
<1.5 |
|
Beam diameter at the aperture (1/e2 , mm) |
<1.5 | <1.5 | <2.5 |
|
Beam divergence, full angle (mrad) |
<1.2 | ||
|
Polarization ratio |
|
>100:1, Vertical±5 degree (Horizontal Optional) |
|
|
Warm-up time (minutes) |
<10 | ||
|
Pointing stability after warm-up (mrad) |
<0.05 | ||
|
Beam height from base plate (mm) |
24.8 | 27.4 | 45 |
|
Operating temperature (℃) |
15-35 | ||
|
Power supply (90-264VAC) |
PSU-III-FDA | PSU-H-FDA | PSU-H-FDA |
|
Expected lifetime (hours) |
10000 | ||
|
Warranty |
1 YEAR | ||
| Model | MSL-S-532 | MSL-DS-532 |
|
Wavelength (nm) |
532±2 | 532±1 |
|
Operating mode |
CW | |
|
Output power (mW) |
>1,5,10,20,-,50 |
>1,5,10,20,-,100 |
|
Power stability (rms, over 4 hours) |
<1%,<2%,<3% |
|
|
Transverse mode |
TEM00 |
|
|
Longitudinal mode |
Single |
|
|
Spectral linewidth (nm) |
<0.00001 | |
|
Coherent length (m) |
>50 | |
|
Noise of amplitude (rms, 20Hz~20MHz) |
<0.5% | |
|
M 2 factor |
<1.2(<1.1 optional) |
|
|
Beam diameter at the aperture( 1/e2 ,mm) |
0.7±0.05 |
|
|
Beam divergence, full angle (mrad) |
<1.5 | |
|
Polarization ratio |
>100:1 Horizontal±5 degree (Vertical Optional) |
|
|
Pointing stability after warm-up (mrad) |
<0.05 | |
|
Pointing stability Over Temp. (µrad/°C) |
<8 | |
|
Warm-up time (minutes) |
<5 | |
|
Beam height from base plate (mm) |
19 | |
|
Power Consumption(W) |
<30 | <6 |
|
Fiber |
|
Multimode/ Single Mode |
|
Shock Tolerance(6ms) |
7g laterally,15g vertically |
|
|
IP Rating |
IP67 ,IP65 |
|
|
Power supply(90-264VAC) |
PSU-H-FDA ,PSU-A-F |
5V DC (Photoelectric integrated) |
|
Operating temperature (℃) |
0-60 | 15-35 |
|
Max. Heat Dissipation of Head(W) |
10W@50℃,4W@25℃ |
|
|
Storage temperature (℃) |
|
5-50 |
|
Modulation |
Modulation isn`t available. |
|
|
Expected lifetime (hours) |
10000 | |
|
Warranty |
1 YEAR | |
| Model | MSL-RA-532 | MSL-R-532 |
|
Wavelength (nm) |
532±1 | |
|
Operating mode |
CW | |
|
Output power (W) |
>1, 1.1, 1.2, - , 2 |
>1,2...5 |
|
Power stability (rms, over 4 hours) |
<1%, <2%, <3% |
<1%,<2%,<3%,<5% |
|
Transverse mode |
TEM00 |
|
|
Longitudinal mode |
Single |
|
|
Spectral linewidth (nm) |
<0.00001 | |
|
Coherent length (m) |
>50 |
|
|
Noise of amplitude (rms, 1Hz~20MHz) |
<1% | |
|
Beam diameter at the aperture (1/e 2 , mm) |
<2 | ~1.5 |
|
Beam divergence, full angle (mrad) |
<1.2 | <1.5 |
|
M2 factor |
<1.2 | |
|
Warm-up time (minutes) |
<10 | <20 |
|
Pointing stability after warm-up (mrad) |
<0.05 | |
|
Beam height from base plate (mm) |
51 | 59 |
|
Cooled method |
|
Water cooled |
|
Operating temperature (℃) |
20-30 | |
|
Power supply (90-264VAC) |
PSU-H-FDA | PSU-W-FDA |
|
Expected lifetime (hours) |
10000 | |
|
Warranty |
1 YEAR | |
Maklumat copmpany
Changchun New Industries (CNI), foun ded pada tahun 1996, yang terletak di Changchun, China, adalah pengeluar sistem laser pepejal dan diod. CNI mempunyai perkhidmatan yang bertanggungjawab dan boleh dipercayai serta produk berkualiti dengan reka bentuk padat, kebolehpercayaan yang tinggi, prestasi yang sangat baik. Produk ini digunakan secara meluas untuk penyelidikan saintifik, pembuatan peralatan, percubaan bioperubatan, pengukuran ketepatan, hiburan, komunikasi radar, pemprosesan bahan, kawalan proses, pengesanan dalam talian, peralatan penyiasatan dan bidang lain.
Pameran
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now